Meet Pico

Practical Innovation

Pico fitting guide

Before putting on the mask, disconnect the headgear clips by twisting them away from the frame.
1

Before putting on the mask, make sure the cushion fits the width of your nose without blocking your nostrils. The top of the cushion may sit between the bridge and tip of your nose.

Pulling the headgear over your head, gently hold the cushion over your nose.
2

Disconnect the headgear clips by twisting them away from the frame like a key and undo the headgear tab by peeling it away from the headgear strap.

Holding the mask in place, reconnect the clips by pushing them back onto the mask frame.
3

Pull the headgear on over your head and gently place the cushion over your nose.

Pull back the tabs to evenly adjust the side and bottom straps.
4

Now, while holding the mask in place, connect the headgear clips by pressing onto the mask frame.

Connect the Wisp tubing and elbow swivel to the front of the mask.
5

Adjust the top and bottom straps by pulling the tabs back evenly. The mask should rest lightly on your nose. Do not over-tighten. The headgear should fit loose and comfortable.

Connect the Wisp tubing to the flexible tubing that came with your therapy device.
6

Next, connect Pico to the flexible tubing that came with your sleep therapy device. Some air leaking is normal. Adjust the side headgear straps to reduce leaks around your eyes.

Assume different sleeping positions. Move around until you’re comfortable.
7

Assume different sleeping positions. Move around until comfortable. If there are any excessive air leaks, make final adjustments while lying down.